THE RAMS HORN STUDIO

This finely detailed piece was created by artist/jeweler, James E. Boyle.  The carving was done from real life and photographs of Scottish Blackface Sheep and Border Collies at work.  It  is cast in fine, lead-free, jeweler's pewter and hand polished.  This buckle is signed by the artist and fits a 1 1/2" or 1 1/4" belt.  The buckle is cast in one piece so there are no weak solder joints to break off!  Get yours now and get a low number in the limited edition of 2500 that will be cast.

The name of this pin is Highland Mary's Son. This is a large, well made piece by artist James Boyle. It was hand carved and cast in solid, lead-free, jeweler's pewter.  the pin  is 2 1/2" X  1". There is a great ammount of detail in this brooch which shows a Border Collie herding Scottish Blackface Sheep.  In the background is a gate or a sheep hurdle and it has wonderful depth.  The pin is signed and findings are hand soldered!

These are wildly popular at shows.  These dog biscuit earrings hang from stainless steel French, ear wires.  No matter what your breed is, these earrings are perfect.  Match them with one of our dog pins and you have an ensemble. These earrings are very comfortable and light.  Each little bone was hand cast in solid pewter here at The Rams Horn Studio.

This Border Collie pendant shows the dog crouched in a working position.  This is a lovely piece carved and cast by James E. Boyle.  James works from photographs and life and owns a Border Collie himself.  This necklace is cast in lead-free jeweler's pewter and burnished to a nice warm finish. It is also signed and comes with the chain pictured.

These are wildly popular at shows.  These dog paw earrings hang from stainless steel French, ear wires.  No matter what your breed is, these earrings are perfect.  Match them with one of our dog pins and you have an ensemble. These earrings are very comfortable and light.  Each little paw was hand cast in solid pewter here at The Rams Horn Studio.

Here is a wonderful new pin by James E. Boyle of The Rams Horn. This is truly beautiful on any garment.  The pierced out areas allow fabric to show through between the figures which gives this design a nice light effect.  The little shepherd with crook extended works his dog and gathers his ewes.  The overall length of this pin is 2  1/4 inches and it is light enough to be worn on a blouse or hat.  I like it on the lapel of my tweed blazer.  The original was carved by hand and each pin is hand cast by the artist in 100% lead-free pewter.   This pin has a traditional pin and safety clasp, not tack pins.  All findings are hand soldered.

Here is a great little pin for your blazer or hat cast in fine 100% lead free jeweler's pewter.  This design was carved by James Boyle and introduced at the Border Collie National Trials in Bell Grove, Virginia a few years ago.  A perfect gift for a man or women, this light weight pin adds a nice touch to any outfit. This is a tack pin with two pins to keep it secure on your garment.  The pin is 1 and 1/2 inches across.

This is a wonderful handcrafted pin made from fine , lead free, jewelers pewter.  The young shepherd lad is holding a Cheviot lamb and has his trusty Border Collie by his side.  This quality pin is a sheep lovers delight. The artist carved this from an actual photograph of a shepherd from Scotland.  It has quality findings and is signed by the artist.  Pin size, 1 1/2 "  X  2 1/2"

This is a lovely, little, delicate, working  Border Collie pin.  This is not a clutch pin.  It has a nice traditional safety clasp and hinged pin. This pin was carved from life, hand soldered and hand cast by artist/jeweler James E. Boyle in fine jeweler's pewter.  wear him alone or purchase the sheep pin to give him something to work!  This little chap is a mere 7/8 inch long so the detail is blurred by this enlarged picture!

This is a smart, little, working  Border Collie Tie Tack.  This is not a clutch pin, it has a nice sturdy tie tack back with chain and keeper..   This pin was carved from life,the pin cast in place, and hand cast by artist/jeweler James E. Boyle in fine jeweler's pewter.  This dog is 7/8 inch wide. It is a perfect gift is for the BC handlers or breeders.  Any stockman would be proud to sport this tie tack with suit and tie.

This is a nice little 3-D Border Collie pendant by artist/jeweler Beth Maxwell Boyle.  The figure was first sculpted and then cast by hand by the artist in lead-free jeweler's pewter. This is not a mass produced piece.  The little dog comes on a waxed linen cord and is 1 1/2 " long.  The Border Collie is burnished to a warm antique finish.

This incredible pin by artist/designer and jeweler James Boyle is a really amazing piece.  The picture does not even show all the detail.  The Border Collie used as the model was a smooth Border Collie and the 1997 Frisbee Dog Champion!  The pin was hand cast by the artist in 100% lead free jeweler's pewter and is Approx. 2 and 1/8 inches long.  The findings are hand soldered as well.

These are comfortable and detailed Border Collie Earrings from The Rams Horn.  These dog earrings hang from stainless steel French, ear wires.  These earrings are perfect to wear while trialing or to just show off your favorite breed at work.  Match them with one of our Border Collie pins and you have a BC ensemble. These earrings are very comfortable and light.  Each dog was hand cast in solid pewter here by the artist in solid, lead-free, jewelers Pewter. When you wear them one faces forward while one faces back.  -Away to me and Come By!