THE RAMS HORN STUDIO

Here is a pair of wonderful horse and hunt earrings.  The little cantering horses are ringed by a hunt whip coiled up to form a circular frame about them. The width is about 3/4 inch. The mold for these equestrian earrings was made here in our studio from a 19th Century piece I purchased many years ago in a little antique shop near our home. !  The style of these has a great deal of flair and Victorian charm. Each horse earring is hand cast in  lead-free jeweler's pewter and polished to a warm glow. These are really quite light weight and have surgical steel, French style, ear wires that should be fine for even the most sensitive ears!  We supply keepers or rubber ear nuts so you don't loose an earring while taking fences or crossing water! PLEASE NOTE:  Pewter contains neither lead nor Nickel silver!

This pin was created by James E. Boyle and was finely carved from actual photographs of driving horses.   From the flowers on the lady's hat to the winkers on the horse's bridle, every feature has been delicately carved in fine detail.  The horse looks so animated and lifelike you can almost feel the motion. This pin is 1 1/2"  X    2" and was cast in lead-free, jeweler's pewter.  The findings were hand soldered and the pin is signed by the artist!

This pin is a reproduction from a wonderful old horse brooch from the 19th Century.  The detail is grand.  This spirited horse is cast in fine jeweler's pewter that is 100% lead free. It has a sturdy, hand soldered, bar pin on the back with a safety clasp and is burnished to a warm glow.  The pin about 1 and 3/4" wide from the raised leg to the tail. This horse recalls the wonderful engravings and graphics in Victorian Horse books and New England Farm journals.  Its not unlike a Morgan or Hackney pony.  The tail is short as most horses had banged or docked tails to keep them out of the mud during Victorian times, even Morgans!

This is a very handsome, horse head in a horse shoe pin. It is a classic that would look wonderful on any hat or vest. Others have reproduced this design but they are thin stampings.  This is a hand cast brooch meant to last many years. This is a sturdy pin and has a hand-soldered bar-pin on the back with a safety clasp. This pin is 1 1/2 inches high.

What a great pin this is. It is a tooled western saddle brooch that has lots of detail. This piece is hand cast and meant to last many years. It is a very wellmade and has a hand-soldered bar-pin on the back with a safety clasp.

These whimsical donkey earrings are cast of fine, lead-free,  jeweler's pewter and dangle from surgical steel French wires   These are hand cast from old vintage molds!  These kicking asses are very light weight and comfortable to wear. We sell allot of these at shows and folks never seem to tire of them.  Being long ears owners ourselves we think every one should wear these!  Step right up and bid now, don't be shy.  The little guys can't kick too hard!

This whimsical donkey necklace is cast of fine, lead-free,  jeweler's pewter and hangs from a 24 inch, stainless steel chain with a silver wash. This was hand cast from an old vintage mold! . We sell allot of these at shows and folks never seem to tire of them.  Being long ears owners ourselves we think every one should wear one of these!  Step right up and load this this donkey on your trailer.  The little guy can't kick too hard!

This Donkey Pendant is large and a fairly, heavy weight. This is a perfect gift for those who have donkeys or burros. It comes on a waxed, cotton cord.  This Donkey pendant is signed by the artist Beth Maxwell Boyle and is cast in fine lead-free Jeweler's Pewter.  The donkey is about 2  1/2 inches wide from nose to tail.  These also make very nice Christmas Tree ornaments. This is hand cast in solid jeweler's pewter that contains no lead. This is not a toy and is not suitable for small children.

This Celtic disc brooch  was hand cast in solid, lead free, jeweler's pewter. Inspired by the Pictish carvings of horses in Inverurie, Scotland, this is a timeless classic.The design was taken from Bain and is a wonderful Celtic, zoomorphic, horse design. The findings are hand soldered and a loop on the back converts this pin to a pendant.  Just add your leather cord or chain.   This brooch is slightly domed and highly detailed.  The actual disc is 1 and 1/2 inches. It really looks much better in real life! This picture is not good at all!

These are Celtic disc earrings, hand cast in solid, lead-free, jeweler's pewter. The design was taken from Bain and is a wonderful Celtic, zoomorphic, horse design. The ear wires are French style and made of surgical steel.   These earrings are very comfortable and do not pull on your ears.  The actual disc is 7/8" They look much better in real life!

This necklace is hand cast in solid, lead free, jeweler's pewter. The design was taken from Bain and is a wonderful Celtic, zoomorphic tryptic. The chain is stainless steel and 24 inches long.   This is a  light necklace that goes with any style clothing.  The actual disc is 7/8". Please see our other Celtic Horse pieces on this page including matching earrings?

This is a heavy pin.  We sell these to a number of people who make saddle blanket purses and shoulder bags and they pin them on the flap. This is one pin that will not bend on you and it should last a life time.  It has hand soldered findings and a safety clasp. This is truly a timeless classic.

These English riding earrings hang from stainless steel French, ear wires.   Match them with one of our equestrian pins and you have an ensemble. These earrings are very comfortable and light.  Each little horseshoe was hand cast in solid pewter here at The Rams Horn Studio. These great little jockey earrings are very detailed and have allot of depth. Each one has the riding crop, riding hat and horseshoe motif. What a perfect gift for someone who owns thoroughbreds!

This pin was reproduced from an antique silver pin an elderly, Amish gentleman brought back from England many years ago.  He asked me to reproduce this for his Shire horse club and I said sure.  With his blessing I have added it to our line.  It is perfect for all draft breeds and is a nice size that can be worn by a man or a women.   It has two pins to hold it with pinch backs so it won't spin in place or tear your garments.  It is a great pin to wear on a hat or cap.  This pin is 1 1/4 Long.

This wonderful brooch or pin by James Edward Boyle was carved in great detail.  Jim carves his designs from real photographs and live models.  This nice traditional team of work horses could be plowing, cultivating or raking hay!  This would be a wonderful pin for Haflinger owners too!  This quality piece was hand cast in 100% lead-free jewelers pewter and the pin findings were all hand soldered by the artist.  The brooch is 2 and 1/2 inches wide.

This is a  wonderful buckle by James Edward Boyle. Jim carves his designs from real photographs and live models.  This nice traditional team of work horses could be plowing, cultivating or raking hay!  This would be a great buckle for Haflinger owners too!  This is a limited  edition piece so bid now and get a low number of the 2500 that will be cast.  This buckle is designed for the active man or women so it should hold up to years of wear.  The buckle is cast in high quality jeweler's pewter not cheap, pot metal like so many buckles.  This lead free pewter contains 2% real silver which gives it hardness and helps it hold its shine!   The buckle is designed to fit a belt that is 1  1/2" to 1  1/4" in diameter.  The oval is about 3 1/8 X 2 inches.  These would make excellent trophies for your county fair or plowing match!

This pin could be a pulling pony or a draft horse.  The horse is wearing farm or logging harness as you can see the collar with heavy hames.  This pin is 1 1/4 " tall.  It was carved by artist/jeweler Beth Maxwell Boyle.  The pin was hand cast in lead free jeweler's pewter and polished  to a nice bright finish. The findings are hand soldered.  This can be worn on a man's hat or on a lady's jacket!

This is an item we added at the request of a Blacksmith in Georgia.  Each little anvil is a highly detailed miniature of a real anvil.  If you love horses , you will love these!   If you happen to be married to a blacksmith, farrier, or metal worker or are one yourself these are a must have.  Unlike real anvils these are VERY light, comfortable, earrings cast in leadfree, jeweler's pewter.  The simple French wires are of surgical steel.

This is an item we added at the request of a Blacksmith in Georgia.  The little anvil is a highly detailed miniature of a real anvil.  If you love horses , you will love this!   If you happen to be married to a blacksmith, farrier, or metal worker or are one yourself this is a must have.  Unlike real anvils this is VERY light!  It is  cast in leadfree, jeweler's pewter.  The mini anvil hangs from a silver washed, 24 inch, steel chain.  This is suitable for either sex!